Los Angeles · Standing seam roofing contractor
Standing Seam Contractor in Los Angeles
Standing Seam Contractor is the standing seam roofing crew of Eclipse Metal Roofing. We measure your roof, form the panels on our own roll former and install them with our own people, so the contractor you hire is the contractor on your roof.
- Since 2006Roofing in Los Angeles
- In-house roll formingPanels formed by our crew
- Our own crewNo subcontractors, ever
Call (424) 404-8671 Request an estimate
Work done by Eclipse Metal Roofing: panels roll formed on our own equipment, installed by our own crew. CSLB #888710.
- Talk to us(424) 404-8671
- CSLB #888710C-39 roofing, C-43 sheet metal
- Our shopVan Nuys, serving homes across Los Angeles
Why the contractor matters
With standing seam, the crew is the product
Two standing seam roofs can use the same metal, the same color and the same panel profile and still perform very differently. The difference is in the hands of the contractor: how the panels were measured and formed, how the clips were spaced, how the seams were closed, and how the flashings were bent around chimneys, skylights, walls and valleys. Those details decide whether a roof stays quiet and dry for decades or starts to tick, stain and leak.
That is why we built this site around one question homeowners in Los Angeles ask us all the time: who should I hire to put a standing seam roof on my house? Our answer is simple. Hire a crew that forms its own panels, installs its own work and holds the right license, then check every one of those claims yourself.
We form the panels
Our own roll former turns coil into panels cut to the length of each run, so long runs go on without end laps and the color matches from panel to panel.
Read more
We install the roof
The same company that measures your roof sends its own crew to install it. No labor brokers, no handoffs to a subcontractor you never met.
Read more
We hold the license
Eclipse Remodeling & Roofing Inc holds CSLB license #888710, with C-39 roofing and C-43 sheet metal classifications. You can check it at cslb.ca.gov in under a minute.
Read more
Since 2006Roofing in Los Angeles
Who you are hiring
A standing seam crew, not a roofing broker
Standing Seam Contractor is operated by Eclipse Remodeling & Roofing Inc, dba Eclipse Metal Roofing. The company has roofed homes in Los Angeles since 2006, works on residential roofs only, and runs its metal work out of a shop in Van Nuys.
Standing seam is our specialty. A typical job starts with a site visit and measurements, moves to a written scope that names the metal, finish, panel profile, underlayment and flashings, and ends with our crew walking the finished roof with you. Between those points you deal with one company.
What to expect from a standing seam roofer near you in Los Angeles
- Since 2006Roofing in Los Angeles
- CSLB #888710C-39 roofing, C-43 sheet metal
- In-house roll formingPanels formed by our crew
- Our own crewNo subcontractors, ever
How a job runs
From first visit to final walk-through, one crew
Site visit
We measure the roof, check the pitch, the deck and the details, and look at access for the crew and the panels.
Written scope
You get a scope naming the panel, metal, finish, underlayment, flashings, tear-off and who pulls the permit.
Roll forming
We form panels from coil on our own roll former, cut to the lengths your roof calls for, and bend the trim to match.
Install and walk-through
Our crew installs, the city inspects where a permit requires it, and we walk the finished roof with you.
Before you sign with anyone
Three checks that take ten minutes
Look up the license
Search the contractor's license number on the CSLB website. Check that it is active, that the classifications include C-39 roofing, and that workers' compensation is on file if they have employees.
Ask who installs
Ask by name who will be on your roof. If the answer is a subcontractor, you are hiring two companies and only signing with one of them.
Ask who forms the panels
Panels formed to length by the installer, or bought pre-cut from a supplier, both work. You should know which you are getting and how long runs will be handled.
Our full list of questions, with what a good answer sounds like, is on our page about how to hire a standing seam contractor. Ask us every one of them.
Read next
Guides for hiring a standing seam contractor in Los Angeles
- Standing seam roofer near meWhat a local standing seam roofer should offer, and how our site visits work.
- How to hire a standing seam contractorThe questions to ask, and the answers that should make you comfortable.
- In-house roll formingWhy forming panels ourselves changes the roof you end up with.
- About our crewWho we are, how long we have done this, and how we work.
Questions
Hiring a standing seam contractor in Los Angeles: common questions
What does a standing seam contractor do that a general roofer may not?
Standing seam is a specialty. The panels have to be formed to length, the seams locked or snapped over concealed clips, and every flashing bent to fit the roof. A contractor who does this work every week has the forming equipment, the seaming tools and a crew trained on them. Our guide to how to hire a standing seam contractor lists the questions that show the difference.
Do you serve my part of Los Angeles?
Our shop is in Van Nuys and our crew works on homes across Los Angeles. Call us with your address and we will tell you straight away whether we can take the job. Our page for anyone searching for a standing seam roofer near me in Los Angeles explains how we schedule site visits.
Do you form the panels yourselves?
Yes. We run our own roll former, which turns coils of painted metal into finished standing seam panels cut to the length of each run on your roof. Our page on in-house roll forming explains why that matters for a homeowner.
Do you install other kinds of metal roofing?
Standing seam is our specialty, and Eclipse Metal Roofing also installs corrugated metal roofing and metal roofing that looks like shake, tile or slate.
Do you use subcontractors?
No. Our own crew installs every roof we sell, and the company has worked that way since 2006.
Can you give me a price over the phone?
Not an honest one. A standing seam roof is priced from the roof itself: its area and pitch, the number of valleys, skylights and walls, access for the crew, the tear-off, and the metal and finish you choose. We look at the roof first, then give you a written scope.
Estimate
Talk to the contractor who will actually be on your roof
Tell us about the house and what you have in mind. We come out, look at the roof and the access, and give you a written scope for a standing seam roof, with panels formed by our own crew. There is no pressure and no obligation.
